Safety, Usage & Maintenance

**Important note and usage for Bel'air Essential Oils:

Contain 90% isopropyl alcohol and should be regarded as a highly flammable liquid. 

How to use?

Firstly, pour your require essential oil into your lamp and a small amount into the cup. Pour these small amount onto the catalytic burner. Light the catalytic burner with a flame and let it burn for approximately two minutes until it reaches the correct operating temperature by blowing it out and put on the burner protector. 

The heated burner remains active as the flameless, low-temperature catalytic combustion process and diffused aromatics. The lamp does not operate with an open flame, making the fragrance lamp much safer to operate than scented candles.

For more information, you may check this video here.

Precautions should be taken to avoid any possible hazards:

• Make sure the fuel container is in perfect condition, perfectly tight and not leaking.
• When not in use, make sure the airtight cap is on at all times to prevent evaporation (alcohol vapour/air mixture is highly flammable).
• Do not leave unattended during operation.
• Do not use in a non-ventilated room.
• Do not inhale, ingest, or use the lamp fuel in any other manner.
• Take extreme caution while refilling the fragrance lamp. Make sure there is ventilation, and that there is no open flame.
• In case of any spillage, wipe the area carefully before lighting the lamp.
• Do not fill lamps on wooden furniture or use a lamp without a dish underneath it. The fuel will damage furniture.
• Do not light up with other flammable materials around, such as paper, plastic, plants, etc.
• Do not touch the catalytic burner while it is still on flame and even off flame but still heating.